AirLink modems are typically deployed to provide two-way communication with remote devices. AceManager, the AirLink Configuration Executive, enables the modems equipped with ALEOS to be monitored and configured locally or remotely. Support personnel can access Raven or PinPoint modems from anywhere at any time to see how they are operating and how they are configured. Parameter changes can be made instantly over-the-air. Once a single modem is configured and installed correctly, a template can be made to program other modems with the same parameter values. This enables quick, accurate deployment of large pools of modems.

RESOURCES DOWNLOADS: Download AceManager User Guide TOOLS: AceNet AceView WARRANTY: Warranty Info

AceManager significantly reduces deployment and support costs throughout the project life cycle.

---

Screenshots

	You can connect to your modem locally, PPP via the serial port or Ethernet, or remotely using TCP, UDP, or SMS.
	The AceManager status and info screens show the network operating parameters including channel number, cell number, signal strength, block error rates, transmit power level, service provider, and ALEOS firmware version.
	A wide range of ALEOS commands can be configured with AceManager's efficient interface including TCP/IP settings, serial settings, dynamic DNS, low power modes, GPS reports (for PinPoint modems only), Telemetry (for Raven modems only), and more. AceManager also enables instant verification of protocol and interface settings, from any where at any time.
	Once you have configured one Airlink modem you can save a template to use with AceManager or AceNet. Templates created with AceManager enable efficient programming of Pinpoint modems for an entire fleet, or Raven modems across your deployment.
	With AceNet, you can apply a template created in AceManager to several modems at the same time.